Home

Lingo explained

Effects of Pitch, Roll, Yaw & Throttle

How Much Does It Cost?

Model Trimming

NiCad Battery FAQ

Noise Levels

Balancing Propellers

Selecting a Propeller

Running In The Engine

What Channel Should I Use?

What the control sticks do?

What Transmitter should I buy?

Wheel Size?

Build Your Own Indoor Plane


 

What Transmitter Should I buy?

Frequency:
We strongly recommend using only 35mhz transmitters for flying model aircraft. 27mhz transmitters could be hazardous due to the possibility of others using that band for boats on the park lake or model cars anywhere in the park. 40mhz is for land vehicles only - boats & cars - and must not be used for aircraft.

Mode:
For our club, you should obtain a transmitter in the 'mode 1' (throttle right) configuration. The vast majority of our trainers can only fly mode 1. This means that if you get into trouble, you should be able to give your transmitter to you trainer for him to regain control for you. We however do have instructors that can give training for both modes 1 and 2

Model:
Giving your transmitter to your trainer is all very well, but consider if your plane is to low to the ground for a quick recovery. Your plane may have already crashed before the trainer can regain control! There is a system developed to counter this called the 'buddy box' system. The 'buddy box' works with two transmitters linked together as a master & slave, via a cable (that we have on the site). The buddy box system allows both the trainee & the trainer to hold their own transmitters. With the flick of a switch, the trainer can almost instantly take control, with less likelihood of disaster. The two buddy box transmitters must be of the same manufacturer, so if you want to take advantage of the buddy system at SLAMS it is suggested that you should choose Futaba. Nearly all our flyers use Futaba.